Stud Sensor Pro SL stud finder locates the edges of wood and metal studs and joists behind walls, floors and ceilings. Patented SpotLite Pointing System shines a beam of light on the wall to identify the target.
- Stud Scan mode locates the edges of wood or metal studs up to 3/4″ (19mm) deep
- DeepScan mode doubles the scanning depth to 1-1/2″ (38mm)
- Red LED’s light up every time a stud edge is approached
- Patented SpotLite Pointing System, audio alert and a green LED signals when the stud edge is reached
- Zircon patented “over-the-stud” indication alerts user to start the scan in a new location if scanning begins over a stud
- Battery cover also doubles as a belt clip
- Patented SpotLite Pointing System, an audio alert and a green LED signals when the stud edge is reached
- Patented TruCal technology calibrates to any wall’s density and a steady green LED TruCal light alerts the user when the tool is ready and calibrated
- Find stud edges
- Find wood or metal studs
- Scan thick walls for studs
- DeepScan Mode: Doubles scanning depth for thicker surfaces
- SpotLite Beam: Project a beam of light to visualize stud location
- Water Resistance: Splash and water resistant, not waterproof
Specifications
- Height: 5.57″
- Width: 2.34″
- Depth: 1.14″
- Battery Type: 9V Alkaline (not included)
- Operating Temperature: 20° to 105°F (-7° to 41°C)
- Storage Temperature: -20° to 150°F (-29° to 66°C)
- Humidity: 5-90% RH (non-condensing)
- Weight: 2.4 oz Without Battery
Position Accuracy
- Up to a depth of 3/4″: Typically within 1/8″ (3mm) using the dual scan and mark procedure
- Up to a depth of 1-1/2″: Typically within 3/16″ (5mm) using the dual scan and mark procedure
Note
Sensing depth and accuracy can vary due to moisture, content of materials, wall texture, paint, etc. Indoor use only.









